first commit

ini/stm32f4.ini

@@ -0,0 +1,468 @@
+#
+# Marlin Firmware
+# PlatformIO Configuration File
+#
+
+#################################
+#
+# STM32F4 Architecture
+#
+# Naming Example: STM32F401RGT6
+#
+#   F : Foundation (sometimes High Performance F2/F4)
+#   4 : Cortex M4 core
+#  01 : Line/Features
+#   R : 64 or 66 pins  (V:100, Z:144, I:176)
+#   G : 1024KB Flash-memory  (C:256KB, D:384KB, E:512KB)
+#   T : LQFP package
+#   6 : -40...85°C   (7: ...105°C)
+#
+#################################
+
+#
+# ARMED (STM32)
+#
+[env:ARMED]
+platform      = ${common_stm32.platform}
+extends       = common_stm32
+board         = armed_v1
+build_flags   = ${common_stm32.build_flags}
+  -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing
+
+#
+# STM32F401VE
+# 'STEVAL-3DP001V1' STM32F401VE board - https://www.st.com/en/evaluation-tools/steval-3dp001v1.html
+#
+[env:STM32F401VE_STEVAL]
+platform          = ${common_stm32.platform}
+extends           = common_stm32
+board             = marlin_STEVAL_STM32F401VE
+build_flags       = ${common_stm32.build_flags}
+  -DARDUINO_STEVAL -DSTM32F401xE
+  -DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
+extra_scripts     = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+
+#
+# STM32F401RC
+#
+[env:FYSETC_CHEETAH_V20]
+platform          = ${common_stm32.platform}
+extends           = common_stm32
+board             = marlin_FYSETC_CHEETAH_V20
+build_flags       = ${common_stm32.build_flags} -DSTM32F401xC -DVECT_TAB_OFFSET=0xC000
+extra_scripts     = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+
+#
+# FLYF407ZG
+#
+[env:FLYF407ZG]
+platform            = ${common_stm32.platform}
+extends             = common_stm32
+board               = marlin_STM32F407ZGT6
+board_build.variant = MARLIN_FLY_F407ZG
+upload_protocol     = dfu
+build_flags         = ${common_stm32.build_flags}
+  -DVECT_TAB_OFFSET=0x8000
+extra_scripts       = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+
+#
+# FLY MINI (STM32F103RCT6)
+#
+[env:FLY_MINI]
+platform          = ${common_stm32f1.platform}
+extends           = common_stm32f1
+board             = genericSTM32F103RC
+board_build.address  = 0x08005000
+board_build.ldscript = fly_mini.ld
+extra_scripts     = ${common_stm32f1.extra_scripts}
+  buildroot/share/PlatformIO/scripts/custom_board.py
+build_flags       = ${common_stm32f1.build_flags}
+  -DDEBUG_LEVEL=0 -DSS_TIMER=4
+
+#
+# FYSETC S6 (STM32F446RET6 ARM Cortex-M4)
+#
+[env:FYSETC_S6]
+platform          = ${common_stm32.platform}
+extends           = common_stm32
+platform_packages = tool-stm32duino
+board             = marlin_fysetc_s6
+build_flags       = ${common_stm32.build_flags}
+  -DVECT_TAB_OFFSET=0x10000
+  -DHAL_PCD_MODULE_ENABLED
+extra_scripts     = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+debug_tool        = stlink
+upload_protocol   = dfu
+upload_command    = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE"
+
+#
+# STM32F407VET6 with RAMPS-like shield
+# 'Black' STM32F407VET6 board - https://wiki.stm32duino.com/index.php?title=STM32F407
+# Shield - https://github.com/jmz52/Hardware
+#
+[env:STM32F407VE_black]
+platform          = ${common_stm32.platform}
+extends           = common_stm32
+board             = marlin_blackSTM32F407VET6
+build_flags       = ${common_stm32.build_flags}
+  -DARDUINO_BLACK_F407VE
+  -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS
+extra_scripts     = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+
+#
+# Anet ET4-MB_V1.x/ET4P-MB_V1.x (STM32F407VGT6 ARM Cortex-M4)
+# For use with with davidtgbe's OpenBLT bootloader https://github.com/davidtgbe/openblt/releases
+# Comment out board_build.offset = 0x10000 if you don't plan to use OpenBLT/flashing directly to 0x08000000.
+#
+[env:Anet_ET4_OpenBLT]
+platform             = ${common_stm32.platform}
+extends              = common_stm32
+build_flags          = ${common_stm32.build_flags} -DHAL_SD_MODULE_ENABLED -DHAL_SRAM_MODULE_ENABLED
+board                = marlin_STM32F407VGT6_CCM
+board_build.core     = stm32
+board_build.variant  = MARLIN_F4x7Vx
+board_build.ldscript = ldscript.ld
+board_build.firmware = firmware.srec
+# Just openblt.py (not stm32_bootloader.py) generates the file
+board_build.encrypt  = Yes
+board_build.offset   = 0x10000
+board_upload.offset_address = 0x08010000
+build_unflags        = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
+debug_tool           = jlink
+upload_protocol      = jlink
+extra_scripts        = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+  buildroot/share/PlatformIO/scripts/stm32_bootloader.py
+  buildroot/share/PlatformIO/scripts/openblt.py
+
+#
+# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4)
+#
+[env:BIGTREE_SKR_PRO]
+platform          = ${common_stm32.platform}
+extends           = common_stm32
+board             = marlin_BigTree_SKR_Pro
+build_flags       = ${common_stm32.build_flags}
+  -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
+extra_scripts     = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+#upload_protocol   = stlink
+#upload_command    = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run
+debug_tool        = stlink
+debug_init_break  =
+
+#
+# USB Flash Drive mix-ins for STM32
+#
+[stm_flash_drive]
+platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc.zip
+build_flags       = ${common_stm32.build_flags}
+  -DHAL_PCD_MODULE_ENABLED -DHAL_HCD_MODULE_ENABLED
+  -DUSBHOST -DUSBH_IRQ_PRIO=3 -DUSBH_IRQ_SUBPRIO=4
+
+#
+# BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) with USB Flash Drive Support
+#
+[env:BIGTREE_SKR_PRO_usb_flash_drive]
+extends           = env:BIGTREE_SKR_PRO
+platform_packages = ${stm_flash_drive.platform_packages}
+build_unflags     = -DUSBCON -DUSBD_USE_CDC
+build_flags       = ${stm_flash_drive.build_flags}
+  -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000
+
+#
+# BigTreeTech E3 RRF (STM32F407VGT6 ARM Cortex-M4)
+#
+[env:BIGTREE_E3_RRF]
+platform            = ${common_stm32.platform}
+extends             = common_stm32
+board               = marlin_STM32F407VGT6_CCM
+board_build.variant = MARLIN_BIGTREE_E3_RRF
+build_flags         = ${common_stm32.build_flags}
+  -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
+  -DSERIAL_RX_BUFFER_SIZE=255 -DSERIAL_TX_BUFFER_SIZE=255
+extra_scripts       = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+
+#
+# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4)
+#
+[env:BIGTREE_GTR_V1_0]
+platform          = ${common_stm32.platform}
+extends           = common_stm32
+board             = marlin_BigTree_GTR_v1
+extra_scripts     = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+build_flags       = ${common_stm32.build_flags}
+  -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
+
+#
+# Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) with USB Flash Drive Support
+#
+[env:BIGTREE_GTR_V1_0_usb_flash_drive]
+extends           = env:BIGTREE_GTR_V1_0
+platform_packages = ${stm_flash_drive.platform_packages}
+build_unflags     = -DUSBCON -DUSBD_USE_CDC
+build_flags       = ${stm_flash_drive.build_flags}
+  -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000
+
+#
+# BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4)
+#
+[env:BIGTREE_BTT002]
+platform          = ${common_stm32.platform}
+extends           = common_stm32
+board             = marlin_BigTree_BTT002
+build_flags       = ${common_stm32.build_flags}
+  -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000
+  -DHAVE_HWSERIAL2
+  -DHAVE_HWSERIAL3
+  -DPIN_SERIAL2_RX=PD_6
+  -DPIN_SERIAL2_TX=PD_5
+extra_scripts     = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+
+#
+# BigTreeTech SKR V2.0 (STM32F407VGT6 ARM Cortex-M4) with USB Flash Drive Support
+#
+[env:BIGTREE_SKR_2]
+platform             = ${common_stm32.platform}
+platform_packages    = ${stm_flash_drive.platform_packages}
+extends              = common_stm32
+board                = marlin_STM32F407VGT6_CCM
+board_build.core     = stm32
+board_build.variant  = MARLIN_F4x7Vx
+board_build.ldscript = ldscript.ld
+board_build.offset   = 0x8000
+board_upload.offset_address = 0x08008000
+extra_scripts     = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+  buildroot/share/PlatformIO/scripts/stm32_bootloader.py
+build_flags       = ${stm_flash_drive.build_flags}
+  -DUSE_USBHOST_HS -DUSE_USB_HS_IN_FS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6
+  -DHSE_VALUE=8000000U -DHAL_SD_MODULE_ENABLED
+
+#
+# BigTreeTech Octopus V1.0 (STM32F446ZET6 ARM Cortex-M4)
+#
+[env:BIGTREE_OCTOPUS_V1_0]
+platform          = ${common_stm32.platform}
+extends           = common_stm32
+board             = marlin_BigTree_octopus_v1
+extra_scripts     = ${common.extra_scripts}
+    pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+build_flags       = ${common_stm32.build_flags}
+  -DSTM32F446_5VX -DVECT_TAB_OFFSET=0x8000 -DUSE_USB_HS_IN_FS
+
+#
+# BigTreeTech Octopus V1.0 (STM32F446ZET6 ARM Cortex-M4) with USB Flash Drive Support
+#
+[env:BIGTREE_OCTOPUS_V1_0_USB]
+extends           = env:BIGTREE_OCTOPUS_V1_0
+platform_packages = ${stm_flash_drive.platform_packages}
+#build_unflags     = -DUSBCON -DUSBD_USE_CDC
+build_flags       = ${stm_flash_drive.build_flags}
+  -DSTM32F446_5VX -DVECT_TAB_OFFSET=0x8000
+  -DUSBCON -DUSE_USBHOST_HS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6 -DUSE_USB_HS_IN_FS -DUSBD_USE_CDC_MSC
+
+#
+# Lerdge base
+#
+[lerdge_common]
+platform            = ${common_stm32.platform}
+extends             = common_stm32
+board               = marlin_STM32F407ZGT6
+board_build.variant = MARLIN_LERDGE
+board_build.offset  = 0x10000
+board_build.encrypt = Yes
+extra_scripts       = ${common.extra_scripts}
+                      pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+                      buildroot/share/PlatformIO/scripts/stm32_bootloader.py
+                      buildroot/share/PlatformIO/scripts/lerdge.py
+build_flags         = ${common_stm32.build_flags}
+  -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4
+  -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE
+  -DHAL_SRAM_MODULE_ENABLED
+build_unflags       = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483
+
+#
+# Lerdge X
+#
+[env:LERDGEX]
+platform             = ${lerdge_common.platform}
+extends              = lerdge_common
+board_build.firmware = Lerdge_X_firmware_force.bin
+
+#
+# Lerdge X with USB Flash Drive Support
+#
+[env:LERDGEX_usb_flash_drive]
+platform          = ${env:LERDGEX.platform}
+extends           = env:LERDGEX
+platform_packages = ${stm_flash_drive.platform_packages}
+build_flags       = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}
+
+#
+# Lerdge S
+#
+[env:LERDGES]
+platform             = ${lerdge_common.platform}
+extends              = lerdge_common
+board_build.firmware = Lerdge_firmware_force.bin
+
+#
+# Lerdge S with USB Flash Drive Support
+#
+[env:LERDGES_usb_flash_drive]
+platform          = ${env:LERDGES.platform}
+extends           = env:LERDGES
+platform_packages = ${stm_flash_drive.platform_packages}
+build_flags       = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}
+
+#
+# Lerdge K
+#
+[env:LERDGEK]
+platform             = ${lerdge_common.platform}
+extends              = lerdge_common
+board_build.firmware = Lerdge_K_firmware_force.bin
+build_flags          = ${lerdge_common.build_flags} -DLERDGEK
+
+#
+# Lerdge K with USB Flash Drive Support
+#
+[env:LERDGEK_usb_flash_drive]
+platform          = ${env:LERDGEK.platform}
+extends           = env:LERDGEK
+platform_packages = ${stm_flash_drive.platform_packages}
+build_flags       = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags}
+
+#
+# RUMBA32
+#
+[env:rumba32]
+platform             = ${common_stm32.platform}
+extends              = common_stm32
+build_flags          = ${common_stm32.build_flags}
+  -Os
+  -DHAL_PCD_MODULE_ENABLED
+  -DDISABLE_GENERIC_SERIALUSB
+  -DHAL_UART_MODULE_ENABLED
+  -DTIMER_SERIAL=TIM9
+board                = rumba32_f446ve
+upload_protocol      = dfu
+monitor_speed        = 500000
+board_build.core     = stm32
+board_build.variant  = MARLIN_F446VE
+board_build.ldscript = ldscript.ld
+board_build.offset   = 0x0000
+board_build.encrypt  = No
+board_build.firmware = firmware.bin
+extra_scripts        = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+  buildroot/share/PlatformIO/scripts/stm32_bootloader.py
+
+#
+# MKS Robin Pro V2
+#
+[env:mks_robin_pro2]
+platform             = ${common_stm32.platform}
+platform_packages    = ${stm_flash_drive.platform_packages}
+extends              = common_stm32
+build_flags          = ${stm_flash_drive.build_flags}
+board                = genericSTM32F407VET6
+board_build.core     = stm32
+board_build.variant  = MARLIN_F4x7Vx
+board_build.ldscript = ldscript.ld
+board_build.firmware = firmware.bin
+board_build.offset   = 0x0000
+board_upload.offset_address = 0x08000000
+build_unflags        = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC
+debug_tool           = jlink
+upload_protocol      = jlink
+extra_scripts        = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+  buildroot/share/PlatformIO/scripts/stm32_bootloader.py
+
+#
+# This SPI is used by Robin Nano V3
+#
+[stm32f4_I2C1]
+build_flags = -DPIN_WIRE_SCL=PB6 -DPIN_WIRE_SDA=PB7
+
+#
+# MKS Robin Nano V3
+#
+[env:mks_robin_nano_v3]
+platform             = ${common_stm32.platform}
+extends              = common_stm32
+build_flags          = ${common_stm32.build_flags} ${stm32f4_I2C1.build_flags} -DHAL_PCD_MODULE_ENABLED -DUSBCON -DUSBD_USE_CDC
+board                = marlin_STM32F407VGT6_CCM
+board_build.core     = stm32
+board_build.variant  = MARLIN_F4x7Vx
+board_build.ldscript = ldscript.ld
+board_build.firmware = Robin_nano_v3.bin
+board_build.offset   = 0xC000
+board_upload.offset_address = 0x0800C000
+build_unflags        = ${common_stm32.build_unflags}
+debug_tool           = jlink
+upload_protocol      = jlink
+extra_scripts        = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+  buildroot/share/PlatformIO/scripts/stm32_bootloader.py
+
+#
+# MKS Robin Nano V3 with USB Flash Drive Support
+# Currently, using a STM32duino fork, until USB Host get merged
+#
+[env:mks_robin_nano_v3_usb_flash_drive]
+extends           = env:mks_robin_nano_v3
+platform_packages = ${stm_flash_drive.platform_packages}
+build_flags       = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags}
+  -DUSBCON
+  -DUSE_USBHOST_HS
+  -DUSBD_IRQ_PRIO=5
+  -DUSBD_IRQ_SUBPRIO=6
+  -DUSE_USB_HS_IN_FS
+  -DUSBD_USE_CDC
+
+#
+# MKS Robin Nano V3 with USB Flash Drive Support and Shared Media
+# Currently, using a STM32duino fork, until USB Host and USB Device MSC get merged
+#
+[env:mks_robin_nano_v3_usb_flash_drive_msc]
+platform          = ${common_stm32.platform}
+extends           = env:mks_robin_nano_v3
+platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc.zip
+build_unflags     = ${common_stm32.build_unflags} -DUSBD_USE_CDC
+build_flags       = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags}
+  -DUSBCON
+  -DUSE_USBHOST_HS
+  -DUSBD_IRQ_PRIO=5
+  -DUSBD_IRQ_SUBPRIO=6
+  -DUSE_USB_HS_IN_FS
+  -DUSBD_USE_CDC_MSC
+
+#
+# STM32F401RC
+# 'creality' STM32F401RC board
+#
+[env:STM32F401RC_creality]
+platform             = ${common_stm32.platform}
+extends              = common_stm32
+board                = marlin_CREALITY_STM32F401RC
+board_build.offset   = 0x10000
+build_flags          = ${common_stm32.build_flags} 
+  -DSTM32F401xC -DSTM32F4
+build_unflags        = -DUSBCON -DUSBD_USE_CDC
+extra_scripts        = ${common.extra_scripts}
+  pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py
+  buildroot/share/PlatformIO/scripts/stm32_bootloader.py
+debug_tool           = jlink
+upload_protocol      = jlink
+monitor_speed        = 115200