fixed some problems and added the demos for fxhelloworld, fxbasicexample and fxchompies

.idea/dictionaries/zenn.xml

@@ -0,0 +1,3 @@
+<component name="ProjectDictionaryState">
+  <dictionary name="zenn" />
+</component>

.idea/inspectionProfiles/Project_Default.xml

@@ -3,7 +3,7 @@
     <option name="myName" value="Project Default" />
     <inspection_tool class="DuplicatedCode" enabled="true" level="WEAK WARNING" enabled_by_default="true">
       <Languages>
-        <language minSize="101" name="Rust" />
+        <language minSize="268" name="Rust" />
       </Languages>
     </inspection_tool>
   </profile>

Examples/ArduboyFX/fxbasicexample/src/lib.rs

@@ -1,20 +1,51 @@
 #![no_std]
 #![allow(non_upper_case_globals)]
+
 //Include the Arduboy Library
-//Initialize the arduboy object
+#[allow(unused_imports)]
 use arduboy_rust::prelude::*;
+
+#[allow(dead_code)]
 const arduboy: Arduboy2 = Arduboy2::new();
-//The setup() function runs once when you turn your Arduboy on
+
+// Progmem data
+
+// dynamic ram variables
+const FX_DATA_PAGE: u16 = 0xffff;
+#[allow(dead_code)]
+const FX_DATA_BYTES: u32 = 234;
+const FXlogo: u32 = 0x000000;
+const FXlogoWith: i16 = 115;
+const FXlogoHeight: i16 = 16;
+
+static mut x: i16 = (WIDTH - FXlogoWith) / 2;
+static mut y: i16 = 25;
+static mut xDir: i8 = 1;
+static mut yDir: i8 = 1;
+// The setup() function runs once when you turn your Arduboy on
 #[no_mangle]
 pub unsafe extern "C" fn setup() {
     // put your setup code here, to run once:
     arduboy.begin();
-    arduboy.clear();
+    arduboy.set_frame_rate(30);
-    arduboy.print(f!(b"Holmes is cool!\0"));
+    fx::begin_data(FX_DATA_PAGE);
-    arduboy.display();
 }
+// The loop() function repeats forever after setup() is done
 #[no_mangle]
 #[export_name = "loop"]
 pub unsafe extern "C" fn loop_() {
     // put your main code here, to run repeatedly:
+    if !arduboy.next_frame() {
+        return;
+    }
+    fx::draw_bitmap(x, y, FXlogo, 0, 0);
+    x += xDir as i16;
+    y += yDir as i16;
+    if x == 0 || x == WIDTH - FXlogoWith {
+        xDir = -xDir;
+    }
+    if y == 0 || y == HEIGHT - FXlogoHeight {
+        yDir = -yDir;
+    }
+    fx::display_clear()
 }

Examples/ArduboyFX/fxchompies/fxdata/fxdata.h

@@ -1,6 +1,6 @@
 #pragma once
 
-/**** FX data header generated by fxdata-build.py tool version 1.07 ****/
+/**** FX data header generated by fxdata-build.py tool version 1.15 ****/
 
 using uint24_t = __uint24;
 

Examples/ArduboyFX/fxchompies/src/lib.rs

@@ -1,20 +1,105 @@
 #![no_std]
 #![allow(non_upper_case_globals)]
+
 //Include the Arduboy Library
 //Initialize the arduboy object
 use arduboy_rust::prelude::*;
+use arduboyfx::fx_consts::*;
 const arduboy: Arduboy2 = Arduboy2::new();
+
+// FX Data
+const FX_DATA_PAGE: u16 = 0xff65;
+const FX_DATA_BYTES: u32 = 39470;
+const mapGfx: u32 = 0x000000;
+const mapGfxWidth: u16 = 816;
+const mapGfxHeight: u16 = 368;
+const whaleGfx: u32 = 0x0092A4;
+const whaleGfxWidth: u16 = 107;
+const whaleGfxHeight: u16 = 69;
+
+static mut showposition: bool = true;
+static mut select: usize = 0;
+static mut color: u8 = 0;
+static mut x: [i16; 2] = [0, 0];
+static mut y: [i16; 2] = [0, 0];
+static mut mode: u8 = 0;
+
 //The setup() function runs once when you turn your Arduboy on
 #[no_mangle]
 pub unsafe extern "C" fn setup() {
     // put your setup code here, to run once:
     arduboy.begin();
-    arduboy.clear();
+    arduboy.set_frame_rate(120);
-    arduboy.print(f!(b"Holmes is cool!\0"));
+    fx::begin_data(FX_DATA_PAGE);
-    arduboy.display();
 }
 #[no_mangle]
 #[export_name = "loop"]
 pub unsafe extern "C" fn loop_() {
     // put your main code here, to run repeatedly:
+    if !arduboy.next_frame() {
+        return;
+    }
+    arduboy.poll_buttons();
+    if arduboy.pressed(A) && arduboy.pressed(B) {
+        if arduboy.every_x_frames(120) {
+            mode += 1;
+            if mode == 5 {
+                mode = 0
+            }
+        }
+    }
+    if arduboy.just_pressed(B) {
+        showposition = !showposition;
+    }
+    if arduboy.pressed(B) {
+        select = 0;
+    } else {
+        select = 1
+    }
+    if arduboy.just_pressed(A) {
+        color ^= dbmReverse;
+    }
+    if arduboy.pressed(A) {
+        if arduboy.just_pressed(UP) {
+            y[select] -= 1;
+        }
+        if arduboy.just_pressed(DOWN) {
+            y[select] += 1;
+        }
+        if arduboy.just_pressed(LEFT) {
+            x[select] -= 1;
+        }
+        if arduboy.just_pressed(RIGHT) {
+            x[select] += 1;
+        }
+    } else {
+        if arduboy.pressed(UP) {
+            y[select] -= 1;
+        }
+        if arduboy.pressed(DOWN) {
+            y[select] += 1;
+        }
+        if arduboy.pressed(LEFT) {
+            x[select] -= 1;
+        }
+        if arduboy.pressed(RIGHT) {
+            x[select] += 1;
+        }
+    }
+    fx::draw_bitmap(x[0], y[0], mapGfx, 0, dbmNormal);
+    match mode {
+        0 => fx::draw_bitmap(x[1], y[1], whaleGfx, 0, dbmMasked | color),
+        1 => fx::draw_bitmap(x[1], y[1], whaleGfx, 0, dbfMasked | dbmBlack),
+        2 => fx::draw_bitmap(x[1], y[1], whaleGfx, 0, dbfMasked | dbmWhite),
+        3 => fx::draw_bitmap(x[1], y[1], whaleGfx, 0, dbfMasked | dbmInvert),
+        4 => fx::draw_bitmap(x[1], y[1], whaleGfx, 0, dbfMasked | dbmReverse),
+        _ => (),
+    }
+    if showposition {
+        arduboy.set_cursor(0, 0);
+        arduboy.print(x[select]);
+        arduboy.set_cursor(0, 8);
+        arduboy.print(y[select]);
+    }
+    fx::display_clear();
 }

Examples/ArduboyFX/fxhelloworld/src/lib.rs

@@ -1,20 +1,89 @@
 #![no_std]
 #![allow(non_upper_case_globals)]
+
 //Include the Arduboy Library
 //Initialize the arduboy object
 use arduboy_rust::prelude::*;
+use arduboyfx::fx_consts::*;
 const arduboy: Arduboy2 = Arduboy2::new();
+
+//FX Data
+const FX_DATA_PAGE: u16 = 0xffc9;
+const FX_DATA_BYTES: u32 = 13937;
+const arduboyFont: u32 = 0x000000;
+const arduboyFontWidth: u16 = 6;
+const arduboyFontHeight: u16 = 8;
+const arduboyFontFrames: u16 = 256;
+const maskedFont: u32 = 0x000604;
+const maskedFontWidth: u16 = 16;
+const maskedFontHeight: u16 = 24;
+const maskedFontFrames: u8 = 128;
+const helloWorld: u32 = 0x003608;
+
+static mut frames: u16 = 0;
+static mut speed: u8 = 1;
+static mut scroll_x: i16 = 128;
+static mut font_mode: u8 = dcmNormal;
+static mut leading_digits: i8 = 5;
+static str: &str = "FX Demo\0";
 //The setup() function runs once when you turn your Arduboy on
 #[no_mangle]
 pub unsafe extern "C" fn setup() {
     // put your setup code here, to run once:
     arduboy.begin();
-    arduboy.clear();
+    fx::begin_data(FX_DATA_PAGE);
-    arduboy.print(f!(b"Holmes is cool!\0"));
+    fx::set_font(arduboyFont, dcmNormal);
-    arduboy.display();
+    fx::set_cursor_range(0, 32767);
 }
 #[no_mangle]
 #[export_name = "loop"]
 pub unsafe extern "C" fn loop_() {
     // put your main code here, to run repeatedly:
+    if !arduboy.next_frame() {
+        return;
+    }
+    arduboy.poll_buttons();
+    fx::set_cursor(0, 0);
+    fx::set_font_mode(dcmNormal);
+    fx::draw_string(str);
+
+    fx::set_cursor(WIDTH - 5 * arduboyFontWidth as i16, 0);
+    fx::draw_number(frames, leading_digits);
+
+    fx::set_cursor(scroll_x, 24);
+    fx::set_font(maskedFont, dcmMasked | font_mode);
+    fx::draw_string(helloWorld);
+
+    fx::set_cursor(13, HEIGHT - arduboyFontHeight as i16);
+    fx::set_font(arduboyFont, font_mode);
+    fx::draw_string(" Press any button \0");
+
+    fx::display_clear();
+
+    scroll_x -= speed as i16;
+    if scroll_x < -1792 {
+        scroll_x = 128
+    }
+    frames += 1;
+    if arduboy.just_pressed(ANY_BUTTON) {
+        frames = 0
+    }
+    if arduboy.just_pressed(UP) {
+        speed = 2
+    }
+    if arduboy.just_pressed(DOWN) {
+        speed = 1
+    }
+    if arduboy.just_pressed(LEFT) {
+        leading_digits = if leading_digits == -5 { 0 } else { -5 }
+    }
+    if arduboy.just_pressed(RIGHT) {
+        leading_digits = if leading_digits == 5 { 0 } else { 5 }
+    }
+    if arduboy.just_pressed(A) {
+        font_mode = dcmNormal
+    }
+    if arduboy.just_pressed(B) {
+        font_mode = dcmReverse
+    }
 }

Examples/drboy/src/lib.rs

@@ -7,7 +7,6 @@ use arduboy_rust::prelude::*;
 use arduboy_tones::tones_pitch::*;
 mod gameloop;
 
-
 #[allow(dead_code)]
 pub const arduboy: Arduboy2 = Arduboy2::new();
 pub const sound: ArduboyTones = ArduboyTones::new();
@@ -155,7 +154,6 @@ pub unsafe extern "C" fn loop_() {
             gameloop::gameloop();
         }
         GameMode::Losescreen => {
-            //todo
             arduboy.set_text_size(2);
             arduboy.set_cursor(13, p.gameover_height);
             arduboy.print(get_string_addr!(text_gameover));

Project/game/src/lib.rs

@@ -11,24 +11,12 @@ const arduboy: Arduboy2 = Arduboy2::new();
 // Progmem data
 
 // dynamic ram variables
-const FX_DATA_PAGE: u16 = 0xffff;
-#[allow(dead_code)]
-const FX_DATA_BYTES: u32 = 234;
-const FXlogo: u32 = 0x000000;
-const FXlogoWith: i16 = 115;
-const FXlogoHeight: i16 = 16;
 
-static mut x: i16 = (WIDTH - FXlogoWith) / 2;
-static mut y: i16 = 25;
-static mut xDir: i8 = 1;
-static mut yDir: i8 = 1;
 // The setup() function runs once when you turn your Arduboy on
 #[no_mangle]
 pub unsafe extern "C" fn setup() {
     // put your setup code here, to run once:
-    arduboy.begin();
+    
-    arduboy.set_frame_rate(30);
-    FX::begin_data(FX_DATA_PAGE);
 }
 // The loop() function repeats forever after setup() is done
 #[no_mangle]
@@ -38,14 +26,5 @@ pub unsafe extern "C" fn loop_() {
     if !arduboy.next_frame() {
         return;
     }
-    FX::draw_bitmap(x, y, FXlogo, 0, 0);
+    
-    x += xDir as i16;
-    y += yDir as i16;
-    if x == 0 || x == WIDTH - FXlogoWith {
-        xDir = -xDir;
-    }
-    if y == 0 || y == HEIGHT - FXlogoHeight {
-        yDir = -yDir;
-    }
-    FX::display_clear()
 }

arduboy-rust/Wrapper-Project/src/library/arduboy/arduboyfx_export.h

@@ -50,14 +50,10 @@ extern "C"
     {
          FX::drawString(buffer);
     }
-
-////
-
     void arduboyfx_draw_string(const char *str)
     {
          FX::drawString(str);
     }
-////
     void arduboyfx_set_cursor_x(int16_t x)
     {
          FX::setCursorX(x);
@@ -80,19 +76,19 @@ extern "C"
     }
     void arduboyfx_draw_number_i16(int16_t n, int8_t digits)
     {
-        FX::drawNumber(n);
+        FX::drawNumber(n,digits);
     }
     void arduboyfx_draw_number_i32(int32_t n, int8_t digits)
     {
-        FX::drawNumber(n);
+        FX::drawNumber(n,digits);
     }
     void arduboyfx_draw_number_u16(uint16_t n, int8_t digits)
     {
-        FX::drawNumber(n);
+        FX::drawNumber(n,digits);
     }
     void arduboyfx_draw_number_u32(uint32_t n, int8_t digits)
     {
-        FX::drawNumber(n);
+        FX::drawNumber(n,digits);
     }
     void arduboyfx_draw_char(uint8_t c)
     {

arduboy-rust/src/hardware/buttons.rs

@@ -23,6 +23,10 @@ pub const A: ButtonSet = ButtonSet {
 pub const B: ButtonSet = ButtonSet {
     flag_set: 0b00000100,
 };
+/// Just a `const` for the any
+pub const ANY_BUTTON: ButtonSet = ButtonSet {
+    flag_set: 0b11111111,
+};
 /// Just a `const` for the UP button
 pub const UP_BUTTON: ButtonSet = UP;
 /// Just a `const` for the RIGHT button

arduboy-rust/src/library/arduboyfx/fx.rs

@@ -4,16 +4,15 @@
 //! ```
 //! use arduboy_rust::prelude::*;
 //!
-//! fn setup(){
+//! fn setup() {
 //!     FX::begin()
 //! }
-//!
 //! ```
 //! You will need to uncomment the ArduboyFX_Library in the import_config.h file.
 #![allow(non_upper_case_globals)]
 use super::drawable_number::DrawableNumber;
 use super::drawable_string::DrawableString;
-use core::ffi::{c_int, c_long, c_size_t, c_uchar, c_uint, c_ulong};
+use core::ffi::{c_int, c_size_t, c_uchar, c_uint, c_ulong};
 pub fn begin() {
     unsafe { arduboyfx_begin() }
 }
@@ -66,12 +65,15 @@ pub fn set_cursor_x(x: i16) {
 pub fn set_cursor_y(y: i16) {
     unsafe { arduboyfx_set_cursor_y(y) }
 }
-pub fn set_cursor_range(left: i32, wrap: i32) {
+pub fn set_cursor_range(left: i16, wrap: i16) {
     unsafe { arduboyfx_set_cursor_range(left, wrap) }
 }
 pub fn set_font(address: u32, mode: u8) {
     unsafe { arduboyfx_set_font(address, mode) }
 }
+pub fn set_font_mode(mode: u8) {
+    unsafe { arduboyfx_set_font_mode(mode) };
+}
 
 extern "C" {
     #[link_name = "arduboyfx_begin"]
@@ -107,8 +109,10 @@ extern "C" {
     fn arduboyfx_set_cursor_y(y: c_int);
     #[link_name = "arduboyfx_set_font"]
     fn arduboyfx_set_font(address: c_ulong, mode: c_uchar);
+    #[link_name = "arduboyfx_set_font_mode"]
+    fn arduboyfx_set_font_mode(mode: c_uchar);
     #[link_name = "arduboyfx_set_cursor_range"]
-    fn arduboyfx_set_cursor_range(left: c_long, wrap: c_long);
+    fn arduboyfx_set_cursor_range(left: c_int, wrap: c_int);
     #[link_name = "arduboyfx_draw_char"]
     fn arduboyfx_draw_char(c: c_uchar);
 

arduboy-rust/src/prelude.rs

@@ -11,23 +11,21 @@ pub use crate::hardware::led::{self, *};
 pub use crate::heapless::{LinearMap, String, Vec};
 pub use crate::library::arduboy2::{self, *};
 pub use crate::library::arduboy_tones::{self, ArduboyTones};
+#[doc(hidden)]
+pub use crate::library::arduboyfx::{self, fx};
 pub use crate::library::arduino::*;
 pub use crate::library::ardvoice::{self, ArdVoice};
 pub use crate::library::c::*;
-#[doc(hidden)]
-pub use crate::library::arduboyfx::{ fx as FX};
-pub use crate::library::arduboyfx::{self};
 pub use crate::library::eeprom::{EEPROM, EEPROMBYTE, EEPROMBYTECHECKLESS};
 #[doc(hidden)]
 pub use crate::library::progmem::Pstring;
 pub use crate::library::sprites;
 pub use crate::print::*;
+#[doc(inline)]
+pub use crate::serial_print as serial;
 pub use crate::{
     f, get_ardvoice_tone_addr, get_sprite_addr, get_string_addr, get_tones_addr, progmem,
-
 };
-#[doc(inline)]
-pub use crate::{serial_print as serial};
 use core::cmp;
 pub use core::ffi::{
     c_char, c_double, c_float, c_int, c_long, c_longlong, c_size_t, c_uchar, c_uint, c_ulong,

arduboy-rust/src/serial_print.rs

@@ -23,6 +23,7 @@ extern "C" {
 ///
 ///Example
 /// ```
+/// use arduboy_rust::prelude::*;
 /// let value: i16 = 42;
 ///
 /// serial::print(b"Hello World\n\0"[..]); // Prints "Hello World" and then sets the
@@ -42,6 +43,7 @@ pub fn print(x: impl Serialprintable) {
 ///
 ///Example
 /// ```
+/// use arduboy_rust::prelude::*;
 /// let value: i16 = 42;
 ///
 /// serial::print(b"Hello World\n\0"[..]); // Prints "Hello World" and then sets the
@@ -58,6 +60,7 @@ pub fn println(x: impl Serialprintlnable) {
 ///
 /// ### Example
 /// ```
+/// use arduboy_rust::prelude::*;
 /// serial::begin(9600)
 /// ```
 pub fn begin(baud_rates: u32) {
@@ -69,10 +72,11 @@ pub fn end() {
 }
 /// Reads incoming serial data.
 /// Use only inside of [available()]:
-/// ```
+///```
-/// if (serial::available() > 0) {
+/// use arduboy_rust::prelude::*;
+/// if serial::available() > 0 {
 ///     // read the incoming byte:
-///     let incoming_byte: i16 = Serial::read();
+///     let incoming_byte: i16 = serial::read();
 ///
 ///     // say what you got:
 ///     serial::print("I received: ");
@@ -89,23 +93,24 @@ pub fn read() -> i16 {
 ///
 /// Use only inside of [available()]:
 /// ```
-/// if (Serial::available() > 0) {
+/// use arduboy_rust::prelude::*;
+/// if serial::available() > 0 {
 ///     // read the incoming byte:
-///     let incomingByte: &str = Serial::read_as_utf8_str();
+///     let incoming_byte: &str = serial::read_as_utf8_str();
 ///
 ///     // say what you got:
-///     Serial::print("I received: ");
+///     serial::print("I received: ");
-///     Serial::println(incomingByte);
+///     serial::println(incoming_byte);
 /// }
 /// ```
 /// ### Returns
 ///
 ///The first byte of incoming serial data available (or -1 if no data is available). Data type: &str.
 pub fn read_as_utf8_str() -> &'static str {
-    let intcoming_byte = unsafe { serial_read() };
+    let incoming_byte = unsafe { serial_read() };
     static mut L: [u8; 2] = [0, 0];
     unsafe {
-        L[0] = intcoming_byte as u8;
+        L[0] = incoming_byte as u8;
     }
     unsafe { core::str::from_utf8(&L).unwrap() }
 }
@@ -113,13 +118,14 @@ pub fn read_as_utf8_str() -> &'static str {
 /// Get the number of bytes (characters) available for reading from the serial port. This is data that’s already arrived and stored in the serial receive buffer (which holds 64 bytes).
 /// ### Example
 /// ```
-/// if (Serial::available() > 0) {
+/// use arduboy_rust::prelude::*;
+/// if serial::available() > 0 {
 ///     // read the incoming byte:
-///     incomingByte = Serial::read();
+///     let incoming_byte = serial::read();
 ///
 ///     // say what you got:
-///     Serial::print("I received: ");
+///     serial::print("I received: ");
-///     Serial::println(incomingByte);
+///     serial::println(incoming_byte);
 /// }
 /// ```
 pub fn available() -> i16 {
@@ -218,7 +224,7 @@ impl Serialprintlnable for &str {
 
     fn default_parameters() -> Self::Parameters {}
 }
-impl<const N: usize> Serialprintlnable for crate::heapless::String<N> {
+impl<const N: usize> Serialprintlnable for heapless::String<N> {
     type Parameters = ();
 
     fn println_2(self, _params: Self::Parameters) {
@@ -361,7 +367,7 @@ impl Serialprintable for &str {
 
     fn default_parameters() -> Self::Parameters {}
 }
-impl<const N: usize> Serialprintable for crate::heapless::String<N> {
+impl<const N: usize> Serialprintable for heapless::String<N> {
     type Parameters = ();
 
     fn print_2(self, _params: Self::Parameters) {

docs/arduboy-file-converter.html

@@ -833,7 +833,6 @@
                         name = name || blob.name || 'download';
                         a.download = name;
                         a.rel = 'noopener'; // tabnabbing
-                        // TODO: detect chrome extensions & packaged apps
                         // a.target = '_blank'
 
                         if (typeof blob === 'string') {
@@ -1311,7 +1310,6 @@ https://github.com/nodeca/pako/blob/main/LICENSE
 
                     /**
                      * Create the _pako object.
-                     * TODO: lazy-loading this object isn't the best solution but it's the
                      * quickest. The best solution is to lazy-load the worker list. See also the
                      * issue #446.
                      */
@@ -1575,7 +1573,7 @@ https://github.com/nodeca/pako/blob/main/LICENSE
                             decToHex(encodedComment.length, 2) +
                             // disk number start
                             "\x00\x00" +
-                            // internal file attributes TODO
+                            // internal file attributes
                             "\x00\x00" +
                             // external file attributes
                             decToHex(extFileAttr, 4) +
@@ -1982,7 +1980,6 @@ https://github.com/nodeca/pako/blob/main/LICENSE
                     JSZip.support = require("./support");
                     JSZip.defaults = require("./defaults");
 
-                    // TODO find a better way to handle this version,
                     // a require('package.json').version doesn't work with webpack, see #327
                     JSZip.version = "3.10.1";
 
@@ -2352,7 +2349,6 @@ https://github.com/nodeca/pako/blob/main/LICENSE
                         var object = new ZipObject(name, zipObjectContent, o);
                         this.files[name] = object;
                         /*
-                        TODO: we can't throw an exception because we have async promises
                         (we can have a promise of a Date() for example) but returning a
                         promise is useless because file(name, data) returns the JSZip
                         object for chaining. Should we break that to allow the user
@@ -2450,7 +2446,7 @@ https://github.com/nodeca/pako/blob/main/LICENSE
                                 file = this.files[filename];
                                 relativePath = filename.slice(this.root.length, filename.length);
                                 if (relativePath && filename.slice(0, this.root.length) === this.root) { // the file is in the current root
-                                    cb(relativePath, file); // TODO reverse the parameters ? need to be clean AND consistent with the filter search fn...
+                                    cb(relativePath, file); // reverse the parameters ? need to be clean AND consistent with the filter search fn...
                                 }
                             }
                         },
@@ -3053,7 +3049,7 @@ https://github.com/nodeca/pako/blob/main/LICENSE
                     var GenericWorker = require("./GenericWorker");
 
                     // the size of the generated chunks
-                    // TODO expose this as a public variable
+                    //  expose this as a public variable
                     var DEFAULT_BLOCK_SIZE = 16 * 1024;
 
                     /**
@@ -4129,14 +4125,14 @@ https://github.com/nodeca/pako/blob/main/LICENSE
                     function arrayLikeToString(array) {
                         // Performances notes :
                         // --------------------
-                        // String.fromCharCode.apply(null, array) is the fastest, see
+                        // String.fromCharCode.apply(null, array) is the fastest
                         // see http://jsperf.com/converting-a-uint8array-to-a-string/2
                         // but the stack is limited (and we can get huge arrays !).
                         //
                         // result += String.fromCharCode(array[i]); generate too many strings !
                         //
                         // This code is inspired by http://jsperf.com/arraybuffer-to-string-apply-performance/2
-                        // TODO : we now have workers that split the work. Do we still need that ?
+                        // we now have workers that split the work. Do we still need that ?
                         var chunk = 65536,
                             type = exports.getTypeOf(array),
                             canUseApply = true;
@@ -9230,7 +9226,6 @@ https://github.com/nodeca/pako/blob/main/LICENSE
                         this.dmax = 0;              /* zlib header max distance (INFLATE_STRICT) */
                         this.check = 0;             /* protected copy of check value */
                         this.total = 0;             /* protected copy of output count */
-                        // TODO: may be {}
                         this.head = null;           /* where to save gzip header information */
 
                         /* sliding window */
@@ -9762,7 +9757,6 @@ https://github.com/nodeca/pako/blob/main/LICENSE
                                         if (have === 0) { break inf_leave; }
                                         copy = 0;
                                         do {
-                                            // TODO: 2 or 1 bytes?
                                             len = input[next + copy++];
                                             /* use constant limit because in js we should not preallocate memory */
                                             if (state.head && len &&

docs/fxdata-converter.html

@@ -7,7 +7,7 @@
             href="https://upload.wikimedia.org/wikipedia/commons/0/0f/Original_Ferris.svg"
             type="image/svg+xml"
         />
-        <title>ZennDev1337 Image Converter</title>
+        <title>ZennDev1337 fxdata.h Converter</title>
     </head>
 
     <body onload="setup(this);">

run.bat

@@ -3,11 +3,15 @@
 set option=%1
 set optionpath=%2
 set folderpath=
+if [%optionpath%]==[] (
+    set optionpath=""
+)
+
+
 if [%option%]==[] (
     powershell -Command "cargo build -p game --release; cp ./target/arduboy/release/libgame.a ./arduboy-rust/Wrapper-Project/lib/libgame.a; cd arduboy-rust/Wrapper-Project/; pio run -v -t upload; cp ./.pio/build/arduboy/firmware.hex ./build/game.hex; pio run -t clean; rm lib/libgame.a; cd ../../"
     goto :eof
 )
-
 if %option%==fxbuild (
     for /d /r "./Examples/" %%a in (*) do if /i %%~nxa==%optionpath% (
         set folderpath=%%a
@@ -19,6 +23,7 @@ if %option%==fxbuild (
     )
     goto :help
 ) else if %option%==fxupload (
+      set optionpath=%2
       for /d /r "./Examples/" %%a in (*) do if /i %%~nxa==%optionpath% (
           set folderpath=%%a
           goto :fxupload
@@ -29,6 +34,7 @@ if %option%==fxbuild (
       )
       goto :help
 ) else if %option%==fxall (
+      set optionpath=%2
       for /d /r "./Examples/" %%a in (*) do if /i %%~nxa==%optionpath% (
           set folderpath=%%a
           goto :fxall